Product Description
THIS ITEM IS NO LONGER IN STOCK AND IS LOCATED IN THE PAINTBALL GRAVEYARD. THE MANUFACTURER HAS DISCONTINUED THIS PRODUCT AND THERE IS NO CHANCE OF EVER RECEIVING IT. DO NOT PURCHASE THIS ITEM BECAUSE IT WILL NEVER SHIP OUT TO YOU!!! This section was built to let you read and learn about products from the past.
Your marker can fire thousands of rounds every week, puts up with the beating of countless rainy Sundays, and withstands a number of slides through the dirt and mud. Through all of this, you still expect your marker to perform week in and week out. A small bit of maintenance is key to ensuring that your marker functions and performs at its best. One major aspect of marker maintenance is replacing your o-rings. The o-rings in your marker wear down over time by withstanding thousands of cycles along with coming in contact with dirt/debris. Our kits provide an easy and inexpensive way to keep your marker in top shape by swapping out your o-rings.
005 - On/Off Pin
006 - Regulator Pin
007 - ASA to Frame
008 - Solenoid Manifold Assembly
010 (x2) - Bolt Guide Rear
010 (x3) - Regulator Bottom
012 - Regulator Spring Retainer
012 - Regulator Top
013 - Bolt (Front)
014 - Firing Can Cap (Inside)
014 - Regulator Piston
014 (x2) - Regulator Top & Bottom
015 - Bolt (Middle)
016 - Bolt (rear) [or 017]
017 - Bolt (rear) [or 016]
016 - Firing Can (Inside)
017 - Firing Can Cap (Outside)
019 (x3) - Firing Can (Outside)
019 (x3) - Rear Firing Can
2x1mm - Manifold To Body Assembly
2.5x1mm - Solenoid Manifold Assembly
3x1mm (x4) - Solenoid Manifold Assembly
4x1mm - Manifold To Body Assembly
4.5x1mm - Solenoid Manifold Assembly
18x3mm - Firing Can (Front)
Your marker can fire thousands of rounds every week, puts up with the beating of countless rainy Sundays, and withstands a number of slides through the dirt and mud. Through all of this, you still expect your marker to perform week in and week out. A small bit of maintenance is key to ensuring that your marker functions and performs at its best. One major aspect of marker maintenance is replacing your o-rings. The o-rings in your marker wear down over time by withstanding thousands of cycles along with coming in contact with dirt/debris. Our kits provide an easy and inexpensive way to keep your marker in top shape by swapping out your o-rings.
005 - On/Off Pin
006 - Regulator Pin
007 - ASA to Frame
008 - Solenoid Manifold Assembly
010 (x2) - Bolt Guide Rear
010 (x3) - Regulator Bottom
012 - Regulator Spring Retainer
012 - Regulator Top
013 - Bolt (Front)
014 - Firing Can Cap (Inside)
014 - Regulator Piston
014 (x2) - Regulator Top & Bottom
015 - Bolt (Middle)
016 - Bolt (rear) [or 017]
017 - Bolt (rear) [or 016]
016 - Firing Can (Inside)
017 - Firing Can Cap (Outside)
019 (x3) - Firing Can (Outside)
019 (x3) - Rear Firing Can
2x1mm - Manifold To Body Assembly
2.5x1mm - Solenoid Manifold Assembly
3x1mm (x4) - Solenoid Manifold Assembly
4x1mm - Manifold To Body Assembly
4.5x1mm - Solenoid Manifold Assembly
18x3mm - Firing Can (Front)