Reviewer:
Michael Yu
from Camden, NC United States
I got this qev and it works...kinda. I bought the Shocktech body so i couldn't do but so much shaving down to make this qev fit. about halfway through the process i realized that the barb that connects to the hose actually unscrews so you can place it on the reverse side of the qev. this makes the qev face the correct way when screwed all the way in. Make sure you do this before you connect the hose though! I cut my hose to the longer side and now i can't fit it to the other side because it doesn't stick out as far.
Was this review helpful to you?
0 of 0 people found the following review helpful:
Yes, here is what you have to do.
August 25, 2011
Reviewer:
Brendon Juarros
from Colorado Springs, CO United States
Cut a small piece out of the bodykit, you will see when you try to screw it down where you need to cut, I used an xacto Hobby saw. Now when you screw the QEV down all the way it actually faces the side of the firing can. This is because it was designed for an autococker, not an ION. however if you loctite the QEV in place and just tighten it all the way then back it off to where the barb lines up with the solenoid and let it sit til loctite dries, you are golden. no leaks. yay!
So i give this 3 stars. Yes it works, No its not as nice as the 360.
Was this review helpful to you?
1 of 1 people found the following review helpful:
Ok it does work
July 5, 2011
Reviewer:
Anonymous Person
from Arvada, CO United States
Alright the QEV does work for Ions. And you need is a few extra minutes to work on it and it will fit. Its very good I love it. But the reason it "doesnt fit" is because it is suppose to be tight and your not supposed to take it off. If you dont know how to get it on then I suggest you find someone capable to put something simple on your Ion.
Was this review helpful to you?
0 of 0 people found the following review helpful:
It works but not wel
May 22, 2011
Reviewer:
Collin Kellner
from Salem, OR United States
The QEV does exactly what its supposed to.But the installation of it sucks, in fact it didn't even work for my ION, I would screw it in but it wouldn't line up wih the micro line so I suggest that you go with the 360 swivel QEV
Was this review helpful to you?
0 of 0 people found the following review helpful:
Not quite what i hoped for
April 3, 2011
Reviewer:
Josh
from Ashmore, IL United States
When i first got it, i was having a bit of trouble getting it to fit. I actually had to shave down a bit of the plastic body casing to get it to seat properly, but once that was done, it worked beautifully. If you dont mind some extra work putting it on, I think it's well worth it.
Got it 
Ok it does work