Shop Now, Pay Later with AffirmLearn More >

  Home > Paintball Graveyard > Paintball Graveyard Hoppers & Accessories >

BT TM Series Rip Clip Electronic Paintball Loader
TM Rip Clip for TM7 & TM15

Our Price: $84.77

Availability: This Item is Discontinued
Out of Stock

Description Technical Specs
The BT TM7 Rip Clip and BT TM15 Rip Clip Loader is Finally released. The BT TM Rip Clip Loader is compatible with either version and will feed up to 25-30 balls per second.

The BT TM Rip Clip loader uses HALO technology allowing your paintball gun to fire as fast as possible. The BT TM Rip Clip is very easy to install and flows with the look of the entire paintball gun. No more pesky feed elbow on your BT TM series paintball gun.

The new BT TM Rip Clip Loader is electronic and is shipping now. Get your BT TM Rip Clip Loader if you want the right fuel you need to feed your electronic BT TM Paintball Gun!

Please note the the BT TM RIP CLIP LOADER WILL ONLY WORK WITH THE BT TM7 & TM15 Series Paintball Guns.

  • BT TM Rip Clip Loader works with the BT TM-7 and TM-15 Paintball Markers
  • Uses Sound Technology to Feed Balls
  • Radio Frequency Compatible for UItra-Quiet Guns and Reliability
  • Picatinny Rail System for Accessories
  • Built-in Rip Drive
  • 200+ Paintball Capacity
  • 15+bps Feed Ratio
  • 3 Adjustable Speed and Sound Settings
  • Automatic Ball Stack Monitoring
  • Low Battery Indicator
  • Ultra-Quiet Belt Drive
  • Contents
  • BT Rip Clip
  • 200+Round Loader
  • Requires Four AA Batteries (not included)
  • One TM-7 and one TM-15 Series Adapter
  • TM Series Adapter Screws
  • Rip Drive Adjustment Knob
  • Picatinny Locking Rail
  • Rail Lock Thumb Knobs

Average Review: 5 of 5 Total Reviews: 5 Write a review.

  1 of 1 people found the following review helpful:
To Drizzle April 12, 2012
Reviewer: Ian Moore from Cocoa, FL United States  
The batteries in the hopper can be lightened up and last longer. Energizer liothium batteries last about twice as long and way less than half the weight of a NICAD or niMH (regular batteries) battery.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Definitaly Does The Job November 10, 2011
Reviewer: D.R.IZZLE from Staten Island , NY United States  
I use the BT Rip Clip on my TM7 and it works great. I use the X7 Low Profile Hopper on it cause of the look. The only thing that I don't like about it is the weight on it. Once the 4 AA batteries are in, damn thing is a bit heavy and defeats the purpose of buying a light gun. But if weight isn't an issue, then the BT Rip Clip is the loader for you.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Show de bola! October 25, 2011
Reviewer: Fabiano from Uberaba, Minas Gerais Brazil  
Use it in a BT TM-15. Initially worried it would have to make adjustments because I saw many comments about it. But the TM Series, works perfectly, just needed to increase his sensitivity to level 3. It's easy, the manual explains how to make this CD configuration
Good luck!

Was this review helpful to you?

  2 of 2 people found the following review helpful:
Great loader August 4, 2011
Reviewer: Tuflehundon from St Petersburg, FL United States  
I bought this Rip Clip for My X7 Phenom after upgrading the board with the XBoard Reflash. Cyclone just couldn't keep up. This thing is great. Batteries last for a while. I found that on setting 3 which is just over 20bps, and shooting 20 bps I can get 3 cases on a charge of the batteries.

This will fit on A5's, X7's, and Phenoms, if you get the Flasc Rip Clip Adapters for them.

Was this review helpful to you?

  4 of 4 people found the following review helpful:
worth the money August 28, 2010
Reviewer: christopher anderson from anchorage, AK United States  
ok if your looking at this you probly already spent over 350 on a tm 7 or 15 an extra 80 might sound like alot but its worth the money i could tell you how fast it loads or how quick you can fire off a full hopper but you probly know its going to be fast so what your probly wondering is are the rumors true about the rip clip being able to use tippman A5 and X7 hoppers and yes its true everything fits from 450 hopper to the tac cap and i would suggest to get the X7 low profile it looks beter then the stock hopper and its harder to hit

Was this review helpful to you?

Browse for more products in the same category as this item:

Paintball Graveyard > Paintball Graveyard Hoppers & Accessories
(Your shopping cart is empty)