Cons: Stock mount screws run small (depending on the marker)
Pros: Smaller, lighter, solid build, very easy to turn on/off,
Note: For the mini direct mounts, I recommend a rail because the ASA's on/off knob might be placed literally underneath the grip frame for some markers (happened on my Smart Parts Vibe and Ion).
Was this review helpful to you?
1 of 1 people found the following review helpful:
Great ASA for Tippmann A5
July 9, 2012
Reviewer:
Greg Kisinger
from Renton, WA United States
Works great on a 2012 Tippmann A5 with hall effect e-grip. Here's how: o) Buy a Tippmann 90 degree inverted flare elbow (TA10025). o) Buy 2 stainless steel cap screws that are longer than the CP screws and then cut them so they extend past the top of the CP ASA the same distance as the Tippmann screws extended on the old Tippmann ASA. o) Wrap teflon tape clockwise 3 times around the ASA plug and elbow threads. Tighten both very tight.
Was this review helpful to you?
0 of 0 people found the following review helpful:
CP ASA
August 14, 2011
Reviewer:
JONATHON RODRIGUEZ
from Florida
This CP ASA is fantastic its everything I expected! It even came with a lifetime warrenty. I got this ASA for my old Tippmann Model 98 and it looks really good with macroline. The only bad thing is that the screws for the ASA is too short for the Tippmann and had to get longer screws that fit. Other than that ive never been happier:)
Was this review helpful to you?
0 of 0 people found the following review helpful:
Large screw
June 15, 2010
Reviewer:
Evan Gaines
from Frederick, MD United States
The CP on/off is known for its super easy turning. My only complaint is the plug that came with mine to plug the hole that doesn't have the macroline elbow isn't flush. I've tightened it down as far as physicall possible. I even tried while it was mounted to a gun. The allen wrench actually started to bend, and the screw wouldn't go tighter.
Was this review helpful to you?
0 of 0 people found the following review helpful:
Super!
September 1, 2009
Reviewer:
Brian
from Cape Girardeau, MO United States
It works great on my Smartparts Shocker SFT. It's the lightest way to go. Turns smoothly. Easy to mount. Perfect positioning for my new Guerrilla Air HPA tank.
Small and solid 
Large screw