If you know your board is good (it most likely is) or your motor smokes when it tries to spin, this little drop-in exact-fit replacement will take care of everything. It brought my Halo back to life!
Was this review helpful to you?
1 of 1 people found the following review helpful:
Yeah my hopper works again
February 4, 2009
Reviewer:
Justin Hole
from Maumee, OH United States
If you are having problems with your halo and your moter is just not truning and you know your board is good than i suggest that you replace the motor. Thats what i had to do. This drop in replace was my savior. I had nothing but problems with jamming and miss feeding. Due to my motor was shot. I replace it connected all the connections and it was like i had a brand new halo. There is nothing to it. Also a good idea to have a back up just in case you on the field and your hopper takes a dump on you.
Was this review helpful to you?
1 of 1 people found the following review helpful:
Good deal
February 2, 2009
Reviewer:
Blake Hardy
from Las Vegas, NV United States
If your motor burns up on your Halo, this is what you need. It has the motor and everything so you don't have to deal with soldering the wires on a motor that you buy from somewhere else. And this is pretty cheap too.
You will pay around $5 at RadioShack for a replacement motor that probably isn't exactly the right size. Then you have to cut the wires off the old motor and re-solder them onto the new one. Seriously, just buy this and save yourself some trouble.
Cone not spinning much / at all? Motor smoking? 
Yeah my hopper works again