Home > Paintball Graveyard > Paintball Graveyard Gun Accessories & Upgrades >

  The Seventh Element Fusion 7/8 Board with Roller Bearing Trigger

Our Price: $45.77

Availability: Usually Ships in 24 to 48 Hours
Out of Stock

The Seventh Element Board is an after market  board you can replace for the stock board. It has 9 different Firing modes. This board now comes with Seventh Element's new Roller Bearing Trigger. The roller bearing trigger will work with both the Fusion's stock board and the fusion's seventh element board.

As well as 9 firing modes, the Seventh Element Board also has the following:
Multi Color LED, Sound Alert, Low Battery Alert, Eye Malfunction Alert, Auto Shut Down, Tournament Lock, 15 BPS Lock (except Ion & Mini), Adjustable Debounce, Adjustable Ramp Activation Shots, Adjustable Ramp Percentage, Adjustable Rate of Fire, Adjustable Dwell Setting, Adjustable Ball Detection Time, Anti-Mechanical Bounce, Anti Bolt Stick Mechanism, Adjustable Shut Off Function, and a Life Time Warranty.

The Seventh Element Board
Nine Firing Modes:
PSP Ramping
Millennium Ramping
NXL Full Auto
User Defined Ramping
Auto Response
Full Auto
Full Auto/User Defined Ramping
Three Round Burst
  • Multi Color LED
  • Sound Alert
  • Low Battery Alert
  • Eye Malfunction Alert
  • Auto Shut Down
  • Tournament Lock
  • 15 BPS Lock
  • Adjustable Debounce
  • Adjustable Ramp Activation Shots
  • Adjustable Ramp Percentage
  • Adjustable Rate of Fire
  • Adjustable Dwell
  • Adjustable Ball Detection Time
  • Adjustable Anti-mechanical bounce
  • Anti Bolt Stick
  • Adjustable Shut Off Function

Average Review: 4 of 5 | Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
board is awesome, trigger doesn't fit well October 22, 2011
Reviewer: Ed from Vancouver, BC Canada  
this board rocks, tons of modes and easy to adjust and best of all it's cheap! my one complaint would be that the battery harness wire is about 10 times too long but there is enough space in there that you will be fine.

the trigger was nice too, great shape but how it attached to the gun was not very well thought out. the tap-out trigger pin is replaced with a screw that doesn't fit properly into the milling. also in my f7 the spacer in the diagram didn't fit, so it got left out. still, the trigger works ok, it is about as smooth as the original trigger and has just as much play. also, the set screw in the trigger which adjusts the activation point would come loose after shooting 30 or so shots and stop activating the switch, so if this happens to you put some loctite in there.
overall 4 out of 5 because it is a great value but the supplied trigger does not work as well as it could. i'm also not sure if the original trigger will work with this board, but i don't think so.

Was this review helpful to you?

Browse for more products in the same category as this item:

Paintball Graveyard > Paintball Graveyard Gun Accessories & Upgrades