Home > Paintball Manufacturers > ANS Paintball Simi Valley >

  ANS Complete Colored O-Ring Kit 3x Rebuild (Bag) - Dye DM12/13

Our Price: $12.00

Availability: Usually Ships in 24 to 48 Hours


Your marker can fire thousands of rounds every week, puts up with the beating of countless rainy Sundays, and withstands a number of slides through the dirt and mud. Through all of this, you still expect your marker to perform week in and week out. A small bit of maintenance is key to ensuring that your marker functions and performs at its best. One major aspect of marker maintenance is replacing your o-rings. The o-rings in your marker wear down over time by withstanding thousands of cycles along with coming in contact with dirt/debris. Our kits provide an easy and inexpensive way to keep your marker in top shape by swapping out your o-rings.
  • O-rings are color coded by size, eliminating the headache of matching up sizes. An included color/size chart helps with your first time rebuilding your marker. After that, just replace o-rings by color when it comes time to rebuild again.
  • All of the o-rings you need to perform a standard rebuild of your marker three times (other quantities available).
  • Contains o-rings for your markers firing assembly, high pressure regulator, LPR (if applicable), etc (unless otherwise noted). Don't be fooled by other kits that only offer a fraction of the o-rings needed to rebuild your marker.
  • 020 (x5) - Outer Sleeve
  • 017 - Cylinder (Internal)
  • 017 - Top Hat (Internal)
  • 015 - Bolt Sail (Middle)
  • 014 - Bolt Tip
  • 014 - Top Hat (Internal)
  • 013 (x2) - Reg Body/Swivel
  • 012 (x2) - LPR Body
  • 012 - Piston
  • 011 (x2) - Bolt Stem
  • 011 - Reg Top Cap
  • 010 - Airport Clam
  • 010 - LPR Seat Retainer
  • 010 - Reg Seat Retainer
  • 007 - LPR Body (Internal)
  • 007 - Reg Seat
  • 005 - Airport Pin
  • 111 (x2) - Bolt Sail Bumpers

Average Review: 1 of 5 | Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
O rings dont fit.... September 11, 2015
Reviewer: Jay from OH  
You figure when the o bag of o rings says it fits a dm13 that the o rings in the bag are actually the right size.
Here we are the night before game day and i decide to rebuild my dm13 bolt o rings. I quickly find out the tan 111 o ring for bolt sail bumpers are under sized and super hard to install on bolt. Next i find the grey 017 o ring for cylinder/ top hat internal are also under sized and cause my bolt to be SUPER hard to move because this stupid grey o ring is to tight.
What other o rings in this kit are the wrong size? Who knows, im throwing this bag of o rings in the spare parts box and heading over to DYE to order a real o ring kit that actually fits! I suggest you do the same.....

Was this review helpful to you?

Browse for more products in the same category as this item:

Paintball Manufacturers > ANS Paintball Simi Valley
General Marker Acc. > O-Rings
Gun Upgrades & Acc. > DYE > Spare Parts
General Marker Accessories - Promo