Holiday SaleShop Now >

  Home >

ANS Ion QEV Quick Exhaust Valve

Our Price: $10.77

Availability: This Item Is Discontinued
Product Code: ANSQEVION
Out of Stock

The Quick Exhaust keeps dirt and debris out of your marker and increases your rate of fire.  It allows the gun to cycle faster. This works with all Ion markers and is a 10/32 fitting.

Average Review: 3.5 of 5 Total Reviews: 8 Write a review.

  0 of 0 people found the following review helpful:
Do NOT change the barb location July 29, 2014
Reviewer: Vantrepes from Rochester, NY  
If you move the barb to the "other port" you will turn it into an elbow that doesn't vent anything.  Keep the barb on the longer end, the other side is the exhaust port, not an input.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Got it March 29, 2013
Reviewer: Michael Yu from Camden, NC United States  
I got this qev and it works...kinda. I bought the Shocktech body so i couldn't do but so much shaving down to make this qev fit. about halfway through the process i realized that the barb that connects to the hose actually unscrews so you can place it on the reverse side of the qev. this makes the qev face the correct way when screwed all the way in. Make sure you do this before you connect the hose though! I cut my hose to the longer side and now i can't fit it to the other side because it doesn't stick out as far.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Yes, here is what you have to do. August 25, 2011
Reviewer: Brendon Juarros from Colorado Springs, CO United States  
Cut a small piece out of the bodykit, you will see when you try to screw it down where you need to cut, I used an xacto Hobby saw. Now when you screw the QEV down all the way it actually faces the side of the firing can. This is because it was designed for an autococker, not an ION. however if you loctite the QEV in place and just tighten it all the way then back it off to where the barb lines up with the solenoid and let it sit til loctite dries, you are golden. no leaks. yay!

So i give this 3 stars. Yes it works, No its not as nice as the 360.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Ok it does work July 5, 2011
Reviewer: Anonymous Person from Arvada, CO United States  
Alright the QEV does work for Ions. And you need is a few extra minutes to work on it and it will fit. Its very good I love it. But the reason it "doesnt fit" is because it is suppose to be tight and your not supposed to take it off. If you dont know how to get it on then I suggest you find someone capable to put something simple on your Ion.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
It works but not wel May 22, 2011
Reviewer: Collin Kellner from Salem, OR United States  
The QEV does exactly what its supposed to.But the installation of it sucks, in fact it didn't even work for my ION, I would screw it in but it wouldn't line up wih the micro line so I suggest that you go with the 360 swivel QEV

Was this review helpful to you?

View All Customer Reviews
(Your shopping cart is empty)