Shop Our Super Sale Gear Shop Now >

  Home > General Marker Acc. > Hoses and Fittings >

90 Degree Macroline Fitting Swivel - Black
90 Black Macro Fitting for Macroline

Our Price: $6.77

Availability: This Item Is Discontinued
Out of Stock

90 Degree push to connect macroline fitting.  The 90 Black macro fitting is a swivel macroline that works on all paintball guns.  The black swivel fittings can be screwed into the gun and it will allow the push to connect part to swivel and give you a short and clean macroline setup.  The 90 black macro fitting is an easy to install upgrade that will look great on your gun.  

The 90 Black Macro Fitting will give your paintball gun the unique look you have always wanted or will help you to completely blackout your gun.  The 90 Black macro fittings are a great and inexpensive way to make your paintball gun stand our from the rest of the crowd.
  • Swivel 90 degress

Average Review: 4.5 of 5 Total Reviews: 8 Write a review.

  0 of 0 people found the following review helpful:
It's a fitting January 28, 2012
Reviewer: Rick Howse from Silver Springs, FL United States  
Mine didn't come with any thread sealer, but I have Teflon tape in tool kit regardless, so this isn't really a negative. Like the color, works well, kind of long on the threaded side, so it sticks out more then usual to me.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
No sealant/teflon on the threads. June 12, 2010
Reviewer: Evan Gaines from Frederick, MD United States  
Nice if you want to have your gun as black as possible, but it doesn't have any kind of air seal on the threads...

Was this review helpful to you?

  0 of 0 people found the following review helpful:
It comes in black! September 1, 2009
Reviewer: Matt from Bellingham, WA United States  
What can I say. It is a macroline fitting. It works. It doesn't leak. Mine came with something coating the threads that I'm assuming is to prevent leaking once you screw it in to your asa, regulator, or expansion chamber. It's cool that it comes in black, but I wish that ring that goes around the marcoline was blacked out too. That would have been pretty cool. It still looks good. I bought it and like it.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
finishing touches for blackout - order#26133 February 16, 2009
Reviewer: oscar mondragon from garland, TX United States  
used these on my dp g3, looks really nice, no need for plumbers tape since it already comes with some on it. CHEAP TOO!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
The threads are the key February 10, 2009
Reviewer: Sean Walling from Goleta, CA United States  
I wrote a review for the straight fitting and my thoughts on the 90 degree fitting are basically the same.  The important factor is the thread locking white substance that comes on the threads that make the fitting air tight when it is installed so the customer doesnt have to put thread locker on him/herself.  However the 90 degree fitting is nice b/c it can accomodate the many strange angles that are needed for macroline.  A good gun to look at this in action is an ego by planet eclipse.  If you need the fitting to be coming out from the side of the gun for example towards the left or right instead of towards the back or front of the gun then you will need a 90 degree instead of the straight fitting

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

General Marker Acc. > Hoses and Fittings
Drop, Rail, ASA, Fittings > Hoses and Fittings
(Your shopping cart is empty)