Home > Tanks & Tank Acc. > Compressed Air - HPA > Guerrilla Air Paintball Tanks >

  Guerrilla Air Pro Compressed Air Tank W/ P3 Regulator 48/3000 - Black

Our Price: $59.95
Sale Price: $39.95
You save $20.00!

Availability: Usually Ships in 24 to 48 Hours

Add Regulator Pressure Kit


Description Technical Specs

The Guerrilla Air Pro 3K rounded aluminum air systems come factory installed with the P3 3000psi adjustable position and output regulator. The Guerrilla Air P3 regulator is the lowest profile 3000psi paintball regulator on the market measuring just .75 inch from the tank to ASA. The P3 includes the PRO low profile burst disks, the hardened PRO fill nipple with conical strut, rotating brass threads and replaceable brass top flange. The regulator is 100% user serviceable using only two allen keys to remove any part on the regulator. The P3 comes preset with a standard output of 800psi with the ability to increase the pressure to 920 psi through the use of shims packaged with the regulator with other mid and low pressure spring kits available to achieve an output pressure between 275psi and 1100psi.
  • 360 Degree Rotation - Multi-Position Brass Thread Collar Enables Custom Set-Up Without Sacrificing Reliability, Convenience, Or Adding length
  • Pro Fill Nipple - Hardened Pro Fill Nipple Featuring An Exclusive Conical Strut That Increases Life of The Fill Nipple Oring And Reduces Maintenance
  • Pro Burst Disks - Exclusive Flush Brass Pro Burst Disks With Quad Vent Technology Offer Regulator Safety Without Sacrificing Low Profile Design
  • Low Profile Design - Lowest Profile Regulator Design On The Market Measuring Just .75 Inches From Tank To ASA
  • Low Fade Technology (LFT) - Exclusive Low Fade Technology (LFT) Provides Consistent Output At Any Tank Pressure
  • Adjustable Output - Included Shim Kit, Or Optional Pressure Kits Allow The P3 To Meet The Optimum Pressure Demands Of Any Marker
  • Rapid Recharge - Our Re-designed Piston Provides Maximum Recharge To Ensure Consistent Performance At Even The Highest Rates Of Fire
  • Brass Threads - In Addition To Rotation 360 Degrees The Brass Collar Eliminates The Excess Wear And Galling Common With Aluminum Threads

Average Review: 4 of 5 | Total Reviews: 13 Write a review.

  0 of 0 people found the following review helpful:
Have two of these, work great with Axes or Minis October 3, 2015
Reviewer: John Foreman from San Jose, CA United States  
While I had to sell my Ninja Grey Ghost 50/4500 carbon fiber tank (regulator wouldn't let empire on/off ASA lever close all the way) the low-profile regulator on these 48/3000 tanks work perfect with Empire Axe or Invert Mini markers.

This basically weighs the same as a 68/4500 carbon fiber, 2.5lbs, perfectly fine weight and size for speedball.

IF you are a small person, or pro player... get a carbon fiber, otherwise this is way better bang for your buck.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
Just a response July 26, 2015
Reviewer: Anonymous Person  
Don't listen to the person under me. Not an on/off Asa

Was this review helpful to you?

  0 of 4 people found the following review helpful:
first fill, already leaking air May 13, 2015
Reviewer: Jason from Lakewood, CA  
I filled up my tank to 2500 psi and used it till 2000 psi and once I take it off my gun I hear ssssssss sound and hear that my tank was leaking.      :(

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Little Beast March 31, 2015
Reviewer: Kevin Rivera from Moreno Valley, CA United States  
I bought this tank thinking it'd look like a 68/3000 which it did not. BUT, this little beast is amazing! I use it on my Project Salvo w/ Cyclone Feeder so it's a gas hog indeed, and it lasts me about 400 rounds which is fine for me as I'm quite conservative. I recommend this tank whether for speedball or short-medium length woodsball games.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
defective tank February 13, 2015
Reviewer: bert from Surprise, AZ United States  
Tank came with a defective o-ring making it leak from the pressure regulator. Followed the instructions on the back of the invoice and called the manufacturer. The manufacturer said they would send me a new o-ring in place of the defective one. While trying to replace the o-ring I stripped out one of the pressure discs using correct size allen key. The metal just gave and stripped out the disc. You get what you pay for but in this situation i'd says it was just a one in a million scenario.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Tanks & Tank Acc. > Compressed Air - HPA > Guerrilla Air Paintball Tanks
Tanks & Tank Acc. > Compressed Air - HPA > DOT Stamped Paintball Tanks
Tanks & Tank Acc. > Compressed Air - HPA > TC Stamped Paintball Tanks
SUPER SALE GEAR > Paintball Sale Tanks & Tank Accessories > Paintball Sale Tanks
Paintball Manufacturers > Guerrilla Air Paintball
Tanks & Tank Acc.