Return to Custom Products CP 2008 08 Mini Direct Mount On/Off ASA - Black
Sort By::
Page of 1


  0 of 0 people found the following review helpful:
 
Small and solid December 6, 2012
Reviewer: Peanut from San Diego, CA United States  
Cons: Stock mount screws run small (depending on the marker)

Pros: Smaller, lighter, solid build, very easy to turn on/off,

Note: For the mini direct mounts, I recommend a rail because the ASA's on/off knob might be placed literally underneath the grip frame for some markers (happened on my Smart Parts Vibe and Ion).

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Great ASA for Tippmann A5 July 9, 2012
Reviewer: Greg Kisinger from Renton, WA United States  
Works great on a 2012 Tippmann A5 with hall effect e-grip.  Here's how:
o) Buy a Tippmann 90 degree inverted flare elbow (TA10025).
o) Buy 2 stainless steel cap screws that are longer than the CP screws and then cut them so they extend past the top of the CP ASA the same distance as the Tippmann screws extended on the old Tippmann ASA.
o) Wrap teflon tape clockwise 3 times around the ASA plug and elbow threads.  Tighten both very tight.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
CP ASA August 14, 2011
Reviewer: JONATHON RODRIGUEZ from Florida  
This CP ASA is fantastic its everything I expected! It even came with a lifetime warrenty. I got this ASA for my old Tippmann Model 98 and it looks really good with macroline. The only bad thing is that the screws for the ASA is too short for the Tippmann and had to get longer screws that fit. Other than that ive never been happier:)

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Large screw June 15, 2010
Reviewer: Evan Gaines from Frederick, MD United States  
The CP on/off is known for its super easy turning. My only complaint is the plug that came with mine to plug the hole that doesn't have the macroline elbow isn't flush. I've tightened it down as far as physicall possible. I even tried while it was mounted to a gun. The allen wrench actually started to bend, and the screw wouldn't go tighter.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Super! September 1, 2009
Reviewer: Brian from Cape Girardeau, MO United States  
It works great on my Smartparts Shocker SFT.  It's the lightest way to go.  Turns smoothly.  Easy to mount.  Perfect positioning for my new Guerrilla Air HPA tank.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Great On/Off February 6, 2009
Reviewer: Mark Belmonte from Sunnyvale, TX United States  
The CP Mini Direct Mount On/Off is stated to be smaller and lighter than the standard one. It definitely is lighter without having to use a rail keeps the marker at a decent height when the tank is pressed against your shoulder. Sometimes with the dovetail/rail ASA set up the marker sits too high and tight, but this takes care of that problem easily. It is well built and has no problems supporting your air system no matter what tank you use. The On/Off works flawlessly and is far better than alot of other ones on the market. Highly recommended.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
Amazing upgrade February 2, 2009
Reviewer: Justin Manson from Missoula, MT United States  
I have the mini and it does not come with the on/off ASA so i looked at CP of course and they just came out with this and bought it instantly and it has treated me well with simple instilation and never a leak again.

Was this review helpful to you?