A Letter From Spyder Paintball to all of our Customers
Dear Paintball Enthusiasts,
This year we are celebrating our 15th year anniversary in the paintball industry. Spyder has come a long way, continuing to be the most popular brand in paintball. To our consumers Spyder means value, creation, and performance. We take pride in being behind this powerful name and are committed to take it to the next level.
We are in relentless pursuit of innovation in paintball. This year we are introducing the all new generation of Classic E-Markers, the Pilot with EYE and the Electra with EYE. We are also revising our MR Series, VS Series, and RS Series giving you more choices to suit your needs. Again we want to surpass your expectations by bringing you the greatest paintball markers.
Besides introducing the latest paintball products to the market we are also playing an important role in promoting Paintball sport worldwide. Spyder is the main sponsor of the nationwide major leagues, Millennium Series, NPPL, Asian Leagues, and al the southern hemisphere leagues. We take the utmost pride in expanding the Spyder Cup 2008 into 7 regional events in North America. Once again the grand prize is 3 brand new cars.
We thank you for your continuous support and loyalty to Spyder brand paintball. Spyder will continue to provide you with a full line in all categories: markers, apparel, paintballs, loaders, accessories, and gear to meet all your needs for the game.
World Headquarters For Spyder Paintball
14010 Live Oak Ave.
Baldwin Park, CA 91706 USA
Toll Free: 888-KINGMAN
Ph: 626-430-2300
Fax: 626-851-8530
Customer Service
Method of operation
The parts that make up the stacked tube blowback are the body, trigger sear, bolt, striker/hammer, valve, valve pin, cup seal, main spring, and valve spring.
When cocked, in the bottom tube, the main spring exerts forward pressure on the striker, which in turn is held in place by the trigger sear, the valve spring exerts backwards pressure on the valve pin which closes the valve with the cup seal, thus holding back the air/CO2. In the top tube sits the bolt which is connected by a rod to the striker and the paintball which sits in the chamber held in place by a detent.
When the trigger is pulled the sear releases the striker, which flies forward being pushed by the main spring. When it reaches its forward limit of travel it impacts the valve spring, thus pushing back the cupseal and opening the valve. The air/CO2 is released, part of its volume is sent upwards into the bolt, which by this time has pushed the paintball into the barrel. This volume propells the paintball through the air. The remainder of the gas pressure forces itself against the striker, pushing it against the mainspring and all the way back past the sear resetting the striker to its resting position, at the same time the valve spring pushes the pin and cupseal forward closing off the valve and resetting the system for its next shot.
The trigger sear can be released by either mechanical force, in so-called mechanical markers, or by an electro-magnetic solenoid in electronic markers.
Clones
The Stacked-tubed blowback system was first created by PMI for their PMI-III, later renamed as the VM-68. Its simplicity and reliability meant is was copied and improved upon by many other manufacturers.
Due to the popularity of the Spyders and the availability of their parts many manufacturers have produced products similar to the Spyders. These use practically the same internals and parts of the Spyders. Some of these clones may even be of higher quality/performance to the Spyder, while some may be cheaper or of less quality.
This mechanism is used by most low-end mechanical and electronic markers and can be easily identified by the double stacked tube body.
Models
[edit] Spyder VS series
The VS series was released in 2006 and is geared towards tournament speedball players. The Spyder VS1 is an electronic marker with eyes, featuring semi-automatic and 3-round burst modes as standard.
A modified Spyder VS1
A modified Spyder VS1
The Spyder VS2 features an infinity trigger system with Spyder's "3G" technology, and a valve that allows the marker to operate as a LP (low pressure) system. The Spyder VS3 adds a Rocking Trigger. The Spyder VS series is available in many colors, and allows the user to purchase body kits that are interchangeable between the VS2 and VS3.
Spyder MR series
The MR series markers are geared towards players who prefer woodsball/scenario type games. They feature mil-sim style bodies with a matte black finish and the same reliable action as other spyders.
The Spyder MR1 is the most basic MR marker and features a detachable stock and completely mechanical (although there is an electronic version) action similar to most mechanical Spyders. The Spyder MR2 features and electronic trigger frame, and an Anti-Chop System (ACS) Bolt which helps prevent chopping. The Spyder MR3 adds eyes to the electronic system to further prevent chops.
Spyder RS Series
The Spyder RS is Spyder's newest line, using their "SE Technology" (Synergy Engineered Technology), which they claim can reduce barrel breaks. There are currently two models, the RS, and the RSX. The RS is the less expensive of the two and can operate on CO2 or HPA at approximately 300 PSI. The RSX is the higher end of the two, and according to Kingman's claims, it can only operate on HPA at a pressure of 250 PSI. In addition, they both include membrane buttons, and the RSX contains a Tadao board.
Spyder Classic Series
Spyder's first markers consisted of these, at which time they did not use the "classic" tag. Now with the revamp of their line-up and the introduction of new markers, they have added the "classic" to the model name of the markers.
Electronic
* Spyder Flash: The first electronic Spyder. Used innovative insert barrel and dip-switch set firing modes. Rear cocking with an oft-maligned aluminum bolt guard. No charging mechanism, used a single 12v battery.
* Spyder Electra /w ACS: An electro-mechanical marker that features an Anti-Chop (ACS) Bolt, electronic trigger frame (CAMD v3.0),shooting 30 bps (balls per second) and a rocking trigger.
* Spyder Electra /w eye: Same basic marker as the Electra but features a different electronic trigger frame (CAMD v4.0) and break-beam eyes to further prevent chopping.
* Spyder Imagine: A simple, reliable Spyder. Great starter gun, cheap, and very upgradeable for the price.
* Spyder Pilot: A low-end electro mechanical marker features an electronic trigger frame (CAMD) with Semi-Auto up to 20 bps in 3 Bursts, 6 Bursts, and Full Auto modes. It also has a top-cocking venturi bolt.The Gun Has a lub-less bolt,Vertical fSpyder pilot, but featuring a different body and Anti-Chop bolt (ACS) that helps prevent chopping and a different trigger frame (CAMD v2.0). Has semi up to 20 bps, 3 burst, 6 burst, or full auto up to 13 bps.
* Spyder Fenix ACS: Features a regulator with gauge, an electronic trigger frame (CAMD v2.0), and a top-cocking Anti-Chop bolt (ACS) that helps prevent chopping.
Mechanical
A Spyder Xtra with the tail piece removed.
A Spyder Xtra with the tail piece removed.
* Spyder Rodeo: The Spyder Rodeo is a mechanical semi-auto marker that features a Regulator that improves consistency, two-finger trigger and rear cocking. It also featured a milled aluminum body. The top-of-the-line Mechanical Spyder.
* Spyder TL and TL Plus: The Spyder TL and TL Plus are semi-auto mechanical markers that featured a new, for its time, sleek body, two-finger trigger, and Rear-Cocking, leaving the older side cocking mechanism behind.
* Spyder Xtra: The Xtra is an entry level mechanical marker that featured a two-finger trigger and gas-thru foregrip and rear cocking.
* Spyder Sonix: Another entry-level marker. Featured two-finger trigger, gas-thru foregrip, and top or side-cocking. Also comes in Sonix Plus and Sonix Pro versions. Was made from re-manufactured basic Spyders. Where mostly re-anodized blue at the factory
* Spyder Victor: An entry-level marker which usually comes as part of a kit. Features two-finger trigger, gas-thru foregrip, and "Vizion" rear-cocking. Comes in 5 versions: Spyder Victor II, Spyder Victor 2006, Spyder Victor, Spyder Victor IV, and the Spyder Victor III.
* Spyder Aggressor: One of the earlier markers, featured a quick-strip pin, rear cocking, vertical feed and two-finger trigger.
* Spyder ONE/Classic: The earliest versions of the spyder. Came with single-finger trigger and side-cocking. Characterized by their silver bodies with black trigger frame and powerfeed tube.
* Spyder Compact 2 in 1: Same popular Compact 2000 paintball gun with a removeable bottomline. Length with barrel: 17"; Weight: 1.8 lbs. Features include: Semi-auto action, Powerfeed, 45 grip with rubber grip cover, Second-generation venturi bolt, anti-double feed, JAVA edition anodizing, double trigger, raised mini sight rail, low pressure chamber, vertical ASA or bottomline setup, external velocity adjuster, aluminum barrel with muzzle break, filter system, composite trigger frame, quick disconnect, field strippable T-pin.
Raven
* Raven Nexion: A low-end electronic marker. Features a regulator, vertical feed, electronic LCD trigger frame with 4 firing modes, and can operate on either CO2 or HPA
* Raven Primal: A high-end electronic marker. Features SDE (Solenoid Direct Electro) system, reactive response trigger, inline regulator with gauge, and low pressure regulator.
|
|
