ANS GEAR

Sorry but this item is no longer in stock at ANSgear. Please check out our other comparable products that are all in stock and shipping today.

The Techt Invert Bolt (MASS REDUCTION TECHNOLOGY) has been engineered with efficiency and consistency as the most crucial design elements. Over the last few months we have tested many different crazy looking super light bolt designs and had mixed results. After long months of testing on the field and shooting over our high precision chrono, we found that using the stock type bolt face oring as well as having no cuts between the two rear orings yielded the best consistency and efficiency. My results found that removing the stock-type face o-ring and replacing it with a standard o-ring reduced our velocity at any pressure and dwell by about 15-30 fps and decreased consistency. We think its because the stock type o-ring seals in the barrel really well. We also found that placing a groove between the two rear orings for added weight reduction actually decreased consistency. Instead of a standard deviation of between 3-4 FPS with no groove, we got a standard deviation of about 15 fps with the groove. The Techt Invert Bolts are our newest bolts that will produced less kick, peak efficiency, and great consistency.The MRTv2 offers deeper cuts for greater weight reduction in bolt the GOLD AND Delrin versions. The Techt Invert Bolt Delrin verison is about 60% lighter than stock. We made two different bolts because we realize that some people would like a metal bolt, while others prefer delrin. Both tested very similar for us, so you really can't go wrong. The metal bolt weighs about 3 grams more than the delrin, however because it's metal it should have a longer wear life. The Techt Invert Bolt is a great upgrade for you to get the best performance out of your paintball gun and not break the bank.