| |
 |
 |
 |
|
Emek Springs |
May 18, 2020 |
| Reviewer:
Fred from Nv
|
|
Installation is easy enough, I've had to take the trigger pack apart before when I replaced my trigger with the Infamous MM trigger. Remove the frame from the body and you'll see 4 tiny Philips head screws. Remove them and you'll see your trigger spring. Be careful not to loose them. I replaced my stock spring with the second softest spring. Put it all back together and your good to go.
Out of the 5 springs the hardest is really stuff, like 8-10 pounds stuff, I can't imagine who would like that in their marker. Stock is around 4 pounds
The other 3 springs are very light with the lightest being paper thin and almost invisible. (Not really but it's the softest spring I've ever seen).
Are these springs going to make you a pro player? No. But if you want to make your trigger pull a little nicer it's a good option. Plus with 5 springs you can experiment and see what you like.
Was this review helpful to you? 
|
|
 |
|
 |
|
