Inception Designs Trident Mid Block Bolt (CGP-0116-MB)

Customer Rating
Availability: Usually Ships in 24 to 48 Hours
Product Code: INCEPTIONBOLTCGP-0116-MB
$50.77
Blue warning Badge

Item Out of Stock

Product Description
THIS ITEM IS NO LONGER IN STOCK AND IS LOCATED IN THE PAINTBALL GRAVEYARD. THE MANUFACTURER HAS DISCONTINUED THIS PRODUCT AND THERE IS NO CHANCE OF EVER RECEIVING IT. DO NOT PURCHASE THIS ITEM BECAUSE IT WILL NEVER SHIP OUT TO YOU!!! This section was built to let you read and learn about products from the past.

This is the ultimate in open faced Delrin bolts utilizing all of the learning from Paintball's history and incorporating it all into one new product.


This bolt utilizes an open face design with anti-stack-clipping chamfered front which helps reduce barrel breaks especially with the small paint we so often see nowadays. This bolt does not have a soft rubber tip but does have a front sealing o-ring and both valve port o-rings making it extremely efficient (we have another bolt option if you want a bolt with the soft rubber tip).


The bolt comes with two sets of o-rings (three o-rings in each set) for easy matching to your guns bore. The smaller o-rings are mainly for older generation guns, and the larger o-rings for more modern guns like our Retro series.


The Bolt is made from lightweight delrin which is self lubricating. It is also turned and milled with slots to reduce weight and friction in the bolt bore.


The gas path is port matched to the hole through the gun body and then angled and optimized for efficient flow through the bolt. Increasing your velocity, consistency and efficiency.


The bolt has a timing hole for allen key clearance that means you do not have to remove the bolt to adjust your hammer lug.


Lightweight delrin bolt pin is included with the full body bolt. It comes with everything needed for immediate install and use.


The bolt has side and top bolt pin holes so it can be used on any guns with corresponding back blocks.


Ball detent slots are milled on both sides of the bolt for compatibility with all detent types.


The Mid Block bolt should work with all mid blocked guns using a sled between the tubes.


The Full Body bolt is for 2K+ body style and dimensioned guns.


Customer Reviews