Financing available on all purchases!Prequalify Now >

  Home > Gun Upgrades & Acc. > Smart Parts > ION & ION XE > QEV >

GOG Ion 360 QEV
GoG Ion 360 QEV


 
Our Price: $24.95


Availability: Usually Ships in 24 to 48 Hours
Product Code: GOG360QEVION
Qty:

Description
 
The Quick Exhaust keeps dirt and debris out of your marker and increases your rate of fire.  It allows the gun to cycle faster. This works with all Ion series markers.

Average Review: Average Review: 3 of 5 3 of 5 Total Reviews: 7 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 QEV Ion May 12, 2019
Reviewer: Tyler from Colorado  
Its possible that =I was one of the lucky ones, but I have a feeling some of the folks commenting aren't doing something right.  

Couple tips that might help:

- The QEV has a top and bottom that should fit together like a puzzle.  I noticed that when I had loosened the QEV too much, the bottom half (ever so slightly) swiveled out of its position extending the height of the QEV by couple millimeters - which would not have allowed me to fit the bolt frame back to the trigger frame if I had not noticed it.  

- Make sure you are placing the QEV in the middle hole (replacing the middle banjo).  I have a feeling a few folks are putting it toward the front or back.  

Again I could be wrong, but I did not have any fit issues, leaks, and/or lock ups.  

Worked like a champ

Was this review helpful to you?

  1 of 2 people found the following review helpful:
 
1 of 5 Not worth it December 26, 2017
Reviewer: Adrian from Nagoya , Aichi Japan  
Got this thinking it was great for an Ion project. I had one on my old Ion 10 years ago and it worked great. This one was too tall it wouldn't fit in the frame. I had to take a drill to the inside of the frame to get the thing to fit and on top of that it took forever to get it threaded just right to stop leaking. Not worth it, just keep the stock internals.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 have a good one and a bad one July 25, 2016
Reviewer: Anonymous Person  
the one I have in my Epiphany is the good one. which is great since its my main marker. has no problems the gun is super quiet with the set up its currently got. it's a wonder part when working correctly.
the one in my Ion is the bad one. I thought it would be just like the Epiphany. boy was I wrong. the QEV worked for a day I let someone play with it the day after and the marker refuses to fire at all. I know this is the problem as the stock banjo work just fine.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 faulty September 28, 2015
Reviewer: Anonymous Person from California  
I must have gotten a defective one because very often the valve would jam and the gun will not fire unless you rapid fire the trigger. no matter how much silicone oil you soak the thing in it always seemed to jam on me. I went back to the stock banjo fitting... it works so much better. sure you sacrifice a few bps but its a good price to pay for a functional marker.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
1 of 5 cheap July 29, 2013
Reviewer: Anonymous Person  
It was a little too tall for the gun and if you over tighten it by the littlist bit he metal twists and it will leak air

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Gun Upgrades & Acc. > Smart Parts > ION & ION XE > QEV
Paintball Manufacturers > GoG Paintball Products
Gun Upgrades & Acc.
Gun Upgrades & Acc. > Smart Parts
Gun Upgrades & Acc. > Smart Parts > ION & ION XE
Gun Upgrades
Gun Parts & Upgrades
(Your shopping cart is empty)