Financing available on all purchases!Prequalify Now >

  Home > Tanks & Tank Acc. > Tank Regulators > Ninja Tank Regulators >

Ninja Pro V2 SHP Series Tank Regulator - 4500 PSI
Ninja Pro V2 SHP Series Tank Regulator - 4500 PSI

Our Price: $72.95

Availability: Usually Ships in 24 to 48 Hours


The PRO V2 SHP was designed specifically for the Tippmann markers running RT and Cyclone Feed as well as Automags running RT. This regulator ships at 1100psi, deal for increasing your rate of fire on your Automag to 20+ balls per second, unleashing the full potential of your Automag. You have the ability to remove 3 shims inside of the regulator to drop the pressure down to 950psi, which we found to be ideal on Tippmanns that are starving for air when using the RT and Cyclone Feed upgrades. Ninja recommends using Steel Braided line with the PRO V2 SHP.
  • 30% Increased Flow
  • Improved Seal Integrity
  • Rotational 360 Degree
  • Made in USA

Average Review: Average Review: 1 of 5 1 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
1 of 5 Used regulators February 14, 2021
Reviewer: Anonymous Person from United States  
The regulator they sent me was clearly used. You can see very clear use at the full nipple and 1.8 disc but then there’s also thread damage and gunk on the gauge. Obviously not new. As I reached out to the paintball community it seems multiple other people are getting used regs marked as “new on this site” don’t recommend at all

Was this review helpful to you?

Browse for more products in the same category as this item:

Tanks & Tank Acc. > Tank Regulators > Ninja Tank Regulators
Paintball Manufacturers > Ninja Paintball
Tanks & Tank Acc. > Tank Regulators
Tanks & Tank Acc.
(Your shopping cart is empty)